PTFE lined tube
All pipes and fittings are produced with construction dimensions according to DIN 2848.
- Dimensional Range: DN15 – DN500
- Material Lining: PTFE (antistatic lining on request) or PP (up to DN300)
- Exterior Materials: Steel or stainless steel
- Flange Design: Fixed-loose flange, fixed-fixed flange, or loose-loose flange
- Pressure Class: PN10 standard (PN16, PN25, PN40, or ANSI on request)
PTFE-lined bend 30° / 45° / 60° / 90°.
All pipes and fittings are produced with construction dimensions according to DIN 2848.
- Dimensional Range: DN15–DN500
- Material Lining: PTFE (antistatic lining on request) or PP (up to DN300)
- Exterior Materials: Steel or stainless steel
- Flange Design: Fixed-loose flange, fixed-fixed flange, or loose-loose flange
- Pressure Class: PN10 standard (PN16, PN25, PN40, or ANSI on request)
T-pipes, PFA
All pipes and fittings are produced with construction dimensions according to DIN 2848.
- Dimensional Range: DN15–DN500
- Material Lining: PFA (up to DN100), PTFE (from DN125), or PP (DN125–DN300)
- Exterior Material: Steel or stainless steel
- Flange Type: Fixed-loose, fixed-fixed, or loose-loose
- Pressure Class: PN10 (PN16, PN25, PN40 or ANSI on request)
Lateral T-tube, PTFE
All pipes and fittings are produced with construction dimensions according to DIN 2848.
- Dimensional Range: DN25–DN100
- Material Lining: PTFE (antistatic lining on request) or PP
- Exterior Materials: Steel or stainless steel
- Flange Design: Fixed-loose flange, fixed-fixed flange, or loose-loose flange
- Pressure Class: PN10 standard (PN16, PN25, PN40, or ANSI on request)
Kors, PFA
All pipes and fittings are produced with construction dimensions according to DIN 2848.
- Dimensional Range: DN15–DN500
- Material Lining: PFA up to DN100 (antistatic lining on request), PTFE from DN125 (antistatic lining on request), or PP (DN125–DN300)
- Exterior Materials: Steel or stainless steel
- Flange Design: Fixed-loose flange, fixed-fixed flange, or loose-loose flange
- Pressure Class: PN10 standard (PN16, PN25, PN40, or ANSI on request)
Reducer flange, PTFE
All pipes and fittings are produced with construction dimensions according to DIN 2848.
- Dimensional Range: DN20–DN500
- Material Lining: PTFE or PFA (antistatic lining on request) or PP (up to DN300)
- Exterior Materials: Steel or stainless steel
- Flange Design: Fixed-loose flange, fixed-fixed flange, or loose-loose flange
- Pressure Class: PN10 standard (PN16, PN25, PN40, or ANSI on request)
Concentric cone, PFA
All pipes and fittings are produced with construction dimensions according to DIN 2848.
- Dimensional Range: DN20–DN500
- Material Lining: PTFE, PFA (antistatic lining on request), or PP (up to DN300)
- Exterior Materials: Steel or stainless steel
- Flange Design: Fixed-loose flange, fixed-fixed flange, or loose-loose flange
- Pressure Class: PN10 standard (PN16, PN25, PN40, or ANSI on request)
Spacer, PTFE
All pipes and fittings are produced with construction dimensions according to DIN 2848.
- Dimensional Range: DN15–DN500
- Material Lining: PTFE (antistatic lining on request) or PP (up to DN300)
- Exterior Materials: Steel or stainless steel
- Pressure Class: PN10 standard (PN16, PN25, PN40, or ANSI on request)
Blind flange, PTFE
All pipes and fittings are produced with construction dimensions according to DIN 2848.
- Dimensional Range: DN15–DN500
- Material Lining: PTFE (antistatic lining on request) or PP (up to DN300)
- Exterior Materials: Steel or stainless steel
- Pressure Class: PN10 standard (PN16, PN25, PN40, or ANSI on request)
Insertion tube, PTFE
All pipes and fittings are produced with construction dimensions according to DIN 2848.
- Dimensional Range: DN25–DN400
- Material Lining: PTFE (antistatic lining on request)
- Exterior Materials: Steel or stainless steel
- Pressure Class: PN10 standard (PN16, PN25, PN40, or ANSI on request)
- Insertion Length: Up to 5500 mm (depending on design and dimension)
Instrument T, PFA
All pipes and fittings are produced with construction dimensions according to DIN 2848.
- Dimensional Range: DN25–DN500
- Material Lining: PFA (antistatic lining on request), PP (up to DN300), or ETFE (DN300–DN500)
- External Material: Steel or stainless steel
- Pressure Class: PN10 standard (PN16, PN25, PN40, or ANSI on request)
Piping system of GAP
Lyma has a complete programme of reinforced thermosetting plastics (GAP). GAP products are manufactured from two-component thermosets and are reinforced in their construction with glass fibre or other high-strength reinforcements such as carbon fibre. Documentation and full traceability is available in production.
GAP products are characterised by very good corrosion properties, high strength and high temperature resistance, excellent electrical insulation and low expansion.
- Dimensional Range: DN15–DN2000
- Standard Length: 6 metres (other lengths on request)
- Pressure Classes: PN0–PN16
- Material Qualities: Standard VE and VEN (VEH, IP, or OP on request)
- Temperature Range: Up to +115°C
GAP reinforced thermoplastic pipes and fittings - PVC/AP
We have a complete range of GAP reinforced pipe systems with PVC media pipes. The pipes and fittings are externally reinforced with glass fibre reinforced polyester.
The glass fibre reinforced polyester is available in different resin qualities:
- VE (Vinylester)
- IP (Isophthalic Acid Polyester)
- OP (Orthophthalic Acid Polyester)
The glass content of strength laminates for pipes = 60% and fittings = min. 45% The production is based on tolerance levels according to. DIN 16964 (pipes) and DIN 16966 (fittings) All pipes and fittings can be supplied with certificates and meet the requirements of PRN 88, with regard to pressure, adhesion, testing, labelling and certification.
Material: PVC Troisdorf rot / Trovidur NL min according to SS1776 and DIN 8061.
Dimensional range: Dy 32-300 mm (larger dimensions on request)
Working pressure: PN 10
Bonding technology: Wire welding for pipes with adhesion according to PRN 88. Bonding with PVC. Chemical fittings where non-adhesive pipes are used.
GAP reinforced thermoplastic pipes and fittings - PP/AP
We have a complete range of GAP reinforced pipe systems with PP media pipes. The pipes and fittings are externally reinforced with glass fibre reinforced polyester.
The glass fibre reinforced polyester is available in different resin qualities:
VE (vinylester)
IP (isophthalic acid polyester)
OP (orthophthalic acid polyester)
The glass content of strength laminates for pipes = 60% and fittings = min. 45% The production is based on tolerance levels according to. DIN 16964 (pipes) and DIN 16966 (fittings) All pipes and fittings can be supplied with certificates and meet the requirements of PRN 88, with regard to pressure, adhesion, testing, labelling and certification.
- Material: PP pipes according to DIN 8078
- Dimensional Range: Dy 32–300 mm (larger dimensions on request)
- Working Pressure: PN10
- Bonding Technology: Wire welding, butt welding, or electric welding sleeve
GAP-reinforced thermoplastic pipes and fittings - PVDF/AP
We have a complete range of GAP reinforced pipe systems with PVDF media pipes. The pipes and fittings are externally reinforced with glass fibre reinforced polyester.
The glass fibre reinforced polyester is available in different resin qualities:
VE (vinylester)
IP (isophthalic acid polyester)
OP (orthophthalic acid polyester)
The glass content of strength laminates for pipes = 60% and fittings = min. 45% The production is based on tolerance levels according to. DIN 16964 (pipes) and DIN 16966 (fittings) All pipes and fittings can be supplied with certificates and meet the requirements of PRN 88, with regard to pressure, adhesion, testing, labelling and certification.
- Material: PVDF liner pipes, pre-treated to achieve adhesion according to PRN 88
- Dimensional Range: Dy 32–300 mm (larger dimensions on request)
- Working Pressure: PN10
- Bonding Technology: Wire welding or butt welding
GAP reinforced thermoplastic pipes and fittings - E-CTFE/AP
We have a complete range of GAP reinforced piping systems with E-CTFE media pipes. The pipes and fittings are externally reinforced with glass fibre reinforced polyester.
The glass fibre reinforced polyester is available in different resin grades VE (vinyl ester), IP (isophthalic acid polyester) and OP (orthophthalic acid polyester).
The glass content of strength laminates for pipes = 60% and fittings = min. 45% The production is based on tolerance levels according to. DIN 16964 (pipes) and DIN 16966 (fittings) All pipes and fittings can be supplied with certificates and meet the requirements of PRN 88, with regard to pressure, adhesion, testing, labelling and certification.
- Material: Extruded E-CTFE pipes (DN25–DN250) and E-CTFE sheet material (DN300) longitudinally welded
- Dimensional Range: DN25–DN300 (larger dimensions on request)
- Working Pressure: PN10
- Bonding Technology: Wire welding
GAP reinforced thermoplastic pipes and fittings - FEP/AP
We have a complete range of AP reinforced pipe systems with FEP media pipes. The pipes and fittings are externally reinforced with glass fibre reinforced polyester.
The glass fibre reinforced polyester is available in different resin grades VE (vinyl ester), IP (isophthalic acid polyester) and OP (orthophthalic acid polyester).
The glass content of strength laminates for pipes = 60% and fittings = min. 45% The production is based on tolerance levels according to. DIN 16964 (pipes) and DIN 16966 (fittings) All pipes and fittings can be supplied with certificates and meet the requirements of PRN 88, with regard to pressure, adhesion, testing, labelling and certification.
- Material: FEP liner pipe (DN25–DN100) and FEP plate material (DN150–DN300), longitudinally welded
- Dimensional Range: DN20–DN300 (larger dimensions on request)
- Working Pressure: PN10
- Bonding Technology: Wire welding
Epoxy pipes and fittings
FuturePipe GRE pipes are ideal for transporting water, fuels and chemicals. Their smooth surface and non-corrosive properties also provide very low friction throughout their lifetime. This allows smaller pipe dimensions to be used, which saves space and means lower costs than equivalent steel pipes of larger dimensions.
- Dimensional Range: 25–1400 mm
- Working Pressure: Up to 50 bar
- Lengths: Standard lengths up to 10 metres
- Temperature Range: -60°C to 110°C
Underground GAP pipework systems
The pipes are produced in a high-tech pipe machine with a continuous joining process quality assured according to ISO 9001. The pipe material is composed of polyester, glass fibre and sand. The corrosion and barrier layer consists of surface mat and chopped glass fibre.
- Dimensional Range: DN100–DN4000
- Pressure Classes: PN1, PN6, PN10, PN16, PN25, PN32
- Stiffness Classes: SN2500, SN5000, SN10000 (SN = N/m²)
- Pipe Lengths: 6 and 12 metres (other lengths on request)
Asahi "original" flange packings
Low tightening torques, about 1/3 compared to conventional smooth gaskets, make Asahi's fully sealing flange gaskets ideal for applications such as plastic pipework. The flange gaskets are available in four versions, homogeneous EPDM, PVDF/EPDM, PTFE/EPDM or FKM-C & FKM-F. The gaskets are equipped with raised grooves for secure sealing. On the PVDF and PTFE gaskets, cold flow and possible indentations are compensated by the elastic sub-rubber.
NEW! Flange gaskets PTFE/EPDM are now available in dimension DN350 and DN400!
- Dimensional Range: DN15–DN400 (PTFE/EPDM), DN15–DN300 (PVDF/EPDM), DN15–DN350 (EPDM), DN15–DN200 (FKM)
- Material: EPDM, PTFE, PVDF, FKM-F, or FKM-C
- Connection: Flange according to DIN PN10 or ANSI
- Temperature Range: Up to +120 °C
Flange protection
The flange protection ensures that any leakage in the event of a rupture is collected, without coming into contact with people.
Intended to be fitted over flange joints, valves, bellows etc. The flange cover is available in a variety of sizes and designs. Easy assembly and disassembly. Can also be supplied with drainage.
Material: Stainless Steel or PTFE
Dimensional Range: DN10 – DN600
Flange Type: Welding flange and/or loose flange according to DIN or ANSI standards.
Safe Ring
Safe-Ring is a splash guard made of PP or stainless steel. The guard is easily installed and fits all existing flanges.
Splash guards
The splash guard ensures that any leakage in the event of a gasket breach comes out virtually unpressurised and without dangerous splashing.
The splash guard is delivered in a roll and cut to the appropriate length. Easy assembly and disassembly with bolted joints. Produced in five strip widths, depending on the flange connection and dimension.
- Material: PP
- Dimensional Range: DN25 – DN600
- Flange Type: Welding and/or loose flange according to DIN PN10 or ANSI 150 lbs
Rubber compensator rectangular
Rubber compensator rectangular
PTFE bellows
The PTFE bellows are designed to absorb movement in corrosive applications and complement our lined pipes. Used, for example, in connections between pump or motor installations to prevent displacement in pipelines.
The bellows are seamless and have support rings of stainless steel AISI304 or AISI316. Supplied in DN15-500. Flanges made of steel or stainless steel according to DIN or ANSI. The programme also includes bellows for vacuum applications.
Richter PFA/PTFE lined ball valve type KN/F
Full bore internally lined ball valve for aggressive and corrosive fluids. The valve is supplied with Richter's patented ENVIPACK system, a spindle seal with PTFE bellows, which is pre-tensioned to withstand hot and cold operating conditions. All media-contacting parts of at least 3 mm thick cladding. Ball with integrated spindle, resulting in no hysteresis in that part of the valve. Can also be supplied with ball and separate stem, i.e. a floating ball design. Actuators can be directly mounted via a mounting flange according to ISO 5211.
Dimensional range: DN15-200
Material: PFA/sea iron epoxy coated
Material of seat rings: PTFE
Temperature range: -60 -+200°C
DIN PTFE Expansion Joints
Our PTFE Expansion Joints are highly flexible and provide compensation of vibrations and heat-induced expansion in your production line. PTFE Expansion Joints with 1 convolute allow high working pressures.
PTFE LINED DIP PIPES
PTFE lined dip pipes are designed for safe and efficient transfer of corrosive liquids, acids, and chemicals from tanks, reactors, and storage vessels. The inner PTFE (Polytetrafluoroethylene) lining provides exceptional resistance to aggressive chemicals, high temperatures, and pressure, ensuring long service life and reliable performance.
These dip pipes combine the structural strength of metal with the superior chemical resistance of PTFE, making them ideal for chemical processing, pharmaceuticals, petrochemicals, and specialty industrial applications. They help prevent corrosion, contamination, and leakage while ensuring smooth and secure fluid handling operations.
PTFE NOZZLE LINERS
PTFE nozzle liners are specially designed to protect nozzles from corrosion, chemical attack, and high-temperature exposure in demanding industrial environments. The inner PTFE (Polytetrafluoroethylene) lining provides excellent chemical resistance, non-stick properties, and long-lasting durability, ensuring safe and efficient fluid transfer.
These liners enhance equipment life, reduce maintenance costs, and prevent contamination during processing. Ideal for chemical, pharmaceutical, petrochemical, and specialty manufacturing applications, PTFE nozzle liners offer reliable performance and superior protection in highly aggressive operating conditions.
